![]() You could buy a less-cheaper broadband router which also has wireless capabilities.You could get your hands on a cheap broadband router which only acts as DHCP-server (no WiFi necessary because you could connect your NVG510 to it). ![]() Downside is that your computer always needs to be on. ![]() You can connect your NVG510 to that because your computer acts as a DHCP-server. You could use a computer to directly connect to the modem and share the internet via a second network-adapter.But thats not possible because all the LAN-ports should get the same ip-range to be able to communicate with each other. ![]() So you would need to connect the modem to a LAN-port and that port should get the public ip. Normally the router/access-point (NVG510) would get an ip from the modem via its WAN-port after which you could use its internal DHCP-server to issue private ip ranges on the LAN-side.īut because this WAN-port is a DSL-port and does not work (correctly) as a normal WAN-port you can't use it. Netgear Cable Modem Premod Hacked Haxorware SB5101 Motorola Cable Modem SB6120. The other method you linked to only works if there is another DHCP-server. Inside Hacking The Cable Modem, youll learn the history of cable modem. This means the modem itself does not act as a DHCP-server. Press the 'STANDBY' button on the top of the device to end Standby mode. The 'POWER' light may also be off if the device is in Standby Mode. The problem here is that you're getting a public ip from your modem. Ensure the power supply is plugged into a working outlet. Like Ecnerwal already said, this is not going to work.
0 Comments
Leave a Reply. |